夾具訂制

AGG可在機械手和模具間提供精i準的中心。

注塑模具內金屬嵌件安放時尤其要注意這一點。

夾具AGG...B 安裝在EOAT上，鋼管 AGG...C 安裝在模具上。

一旦機械手向模具靠近，夾具在壓力的作用下逐步向鋼管靠近，真空泵保養，

并與之接觸。

AGG21-B 和 AGG30-B 采用的是雙動作安全彈簧，確保在壓縮空

氣 (NC)缺失時設備的正常運行。

AGG19-B 采用的是單動作復位彈簧(NO)。

Gripper for engagement

The AGG is used to provide a precise centering between the robot

and the mould.

This necessary when metal inserts must be p1aced in the

mould，漯河真空泵， before the p1astic injection.

The gripper AGG…-B is fitted on the EOAT，真空泵小型， while the steel bushing

AGG…-C is fitted on the mould.

Once the robot has approached the mould， the gripper is

pressurized， thus it closes and engages the bushing.

AGG21-B and AGG30-B are double-acting with a safety spring to

keep the gripper engaged even without compressed air (NC).

AGG19-B is single-acting with reset spring (NO).

SB系列傳感器接線盒

? 用于EOAT上傳感器接線。? 可以轉換PNP和NPN信號。? Is/Os可以是拉電流（PNP）、灌電流（NPN）或干觸點。? 可以串聯多個盒子來控制更多傳感器。? 輸入信號重復LED，便于排除故障（不適用于SB15）。? 提供應變消除裝置和固定至型材的套件。

Connection boxes for series SB sensors? Used for sensor wiring on EOATs.? PNP and NPN signals can be converted.? Is/Os can be current sourcing (PNP)，真空泵多少錢， sinking (NPN) or dry contact

Several boxes can be connected in series to control more sensors

Input signal repetition LED for easy troubleshooting  (not for SB15).

Provided with strain reliefs and kit for fastening to profles.

迷你符合性設備，適用于小抓持器

? X-Y 及 α 角符合性[1]。

? 在方向 Z 為剛性。

? 一根空氣導管連接至中央零位 [2]。

? 另一根空氣導管可鎖定任何偏移位置 [3]。

Mini compliance device， for small grippers

? X-Y and angle α compliance [1].

? Rigid in Z direction.

? One air lead to get the central zero psition [2].

? Another air lead to lock in any offset psition [3].